Brother Label Badge Type

Brother Label Badge Type

Label Types

EventX 2.0 Check-in App supports the following Brother label roll types
  1. DK22205 (62mm x flexible width)
  2. DK22211 (29mm x flexible width)
  3. DK11201
  4. DK11202
  5. DK11208
  6. DKN55224 (UK)
  7. DK2223 (US)
  8. DK-22113 Label Roll (Transparent)

Sample

The image below shows a sample of the label sticker DK22205 on a badge. Please note that the badge is sold separately from the label roll. 

  1. Badge dimensions : 152.4mm x 101.6mm

    • Related Articles

    • Designing a name badge for check-in

      In order to have the namebadges printed, organizers will first need to design the namebadge for attendees. Please refer to the video and article guides below for more information. Video Guide Please refer to this video guide on how to customize a ...

    • Brother Printer Setup Guide

      Video Guide For a video guide on hardware setup, please refer to this link. Supported Brother Printers Below are the Brother printer models that are supported for badge printing. QL-820NWB QL720NW QL-1110NWB (only supported for Check-in App on iOS ...

    • Zebra Badge Guide

      You may order the Zebra Badge for your event. Double Sided Name Badges for Zebra Printer 4″ x 6″ Non-Adhesive Fanfold Stack of 500 Direct Thermal – no ribbon required 1 Slot Punch (Die-cut hole) Paper thick: 175 GSM (g/m2) Badge Paper is for use with ...

    • Zebra Printer Setup Guide

      Before your reception check-in session, you'll need to set up the router, and configure your iPads, printers, and EventX Check-in app for onsite badge printing. Plug in your SIM router. Plug in the power cord to the router and turn the router on by ...

    • How do I order more label rolls?

      Make sure you have enough label rolls to print out the name badges for your upcoming events. EventX provides the printer models Brother QL 720NW/ QL 820NW in our All-In-One box and this printer uses DK22205 labels. If you need to buy more label ...